MilkOil™ Indoor / Hemp Seed Oil
100% Natural | Food-Contact Safe | Eco-Friendly | Non-Toxic | No VOCs | Sustainably Sourced
MilkOil™ - Indoor/Hemp Seed Oil Information
This solvent-free oil finish provides a protective, water-resistant surface. Use on raw or stained wood, milk-painted pieces, or to revive old wood finishes.
It penetrates to protect from the inside out. Does not leave a surface film that will chip or scratch. This food-contact safe hemp seed oil finish is perfect for use in the kitchen on wood cutting boards, butcher block counters, or stone. Used outside, it can restore the luster of old oil-based paint or revitalize surfaces such as cast iron.
Recommended for indoor use.
-
Raw Wood - No prep is required.
Stained Wood - No prep is required.
Milk Painted Surface - A light sand is recommended, for a smooth finish.
Old Wood - No prep is required.
-
Surface must be clean and dry. Test on an inconspicuous spot prior to using on an entire piece.
Apply liberally to surface using a clean lint free cloth or brush. Rub gently until it is absorbed into raw wood or milk painted finish. Buff off excess. For additional sheen and protection, add 2-6 coats.
With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours. Dries in 24 hours. The finished piece may take several days to cure (approx. 30 days). To maintain, apply a light coat every other year as needed. To remove scratches, lightly sand blemish, then reapply oil.
Soap and water clean-up.
-
100% Natural Hemp Seed Oil (Hemp seeds are grown and pressed without herbicides and pesticides)
-
- Hemp seed oil takes approximately 30 days to fully cure. The piece may be gently used during this period, but surface may feel oily and leave a residue on other items that come into contact with in during this period.
- Apply only what the surface will absorb and wipe away excess oil to avoid a sticky or tacky surface.
- Hemp seed oil may be used on raw or milk painted wood floors, but is not recommended for moisture-prone areas like kitchens and baths.
- Can be used indoor and outdoor.
- Approximate Coverage: 8 oz. covers 25 sq. ft. | 16 oz. covers 50 sq. ft.
-
What is hemp seed oil?
Furniture hemp seed oil is an all-natural alternative to wax. It will absorb into your milk painted surface, creating a semi-durable finish. Hemp seed oil is great for bringing old finishes to life. It is also great for reviving dry tired wood, metal, leather and more.
When should I use MilkOil™ over MilkWax™?
Hemp seed oil is natural, so it’s the ideal finish for customers who have skin sensitivities. It’s a food grade finish that can be used on butcher block counters, kitchen tables, and cutting boards. Hemp seed oil is great for direct sunlight and warm rooms because wax will break down and emulsify in extreme heat. For an extra durable interior top coat, apply a coat of hemp oil and let dry (12 – 24 hours), followed by wax. Remember wax over oil, never oil over wax.
Is MilkOil™ Indoor safe to use on cribs and children’s toys?
Yes! MMS MilkOil™ Indoor/Hemp Seed Oil is food-contact safe, which means it is safe for surfaces that come into contact with a baby's mouth.